Avanti DWT18V3S User Manual

8
Using Your Appliance:
SELECTING A WASH PROGRAM:
1) Press and hold the “START/PAUSE” button for approximately 3 seconds to turn on your machine. (Noted
that the door of the dishwasher must be in the OPEN position to access the control panel.)
2) Refer to the Pre-Programmed Wash Cycles table on the previous page, to select a wash program suitable
for your needs.
3) Press the “PROGRAM SELECTION” button until the number of the program you selected appears in the
display.
4) Press the “START / PAUSE” button and close the door of your appliance within approximately 4 seconds
to activate the wash program.
If the door is not closed within approximately 4 seconds, the unit will not start the wash program.
In this case, you must open the door press the “START/PAUSE” button again and close the door within 4
seconds to activate the wash program.
CANCELLING A WASH PROGRAM:
1) Press and hold the “PROGRAM SELECTION” button for approximately 3 seconds.
2) The display will show “1” to confirm cancellation of the wash program.
Note: If the door is opened during a wash cycle, the door must be closed within 4 seconds to continue the
current wash cycle.
If the door is not closed during the 4 seconds, simply press the “START/PAUSE” button again and close the
door within 4 seconds to activate the wash program.
SELECTING AN OPTIONAL WASH OPTION:
1) Select the desired Pre-Programmed Wash Program as directed above.
2) Before pressing the “START/PAUSE” BUTTON, press the “OPTIONS” button.
3) Continue to press until the indicator light of the option you desire is illuminated.
Note: In order to select the “HALF LOAD” option, press and hold the “OPTIONS” button for approximately
3 sections.
4) Press the “START / PAUSE” button and close the door of your appliance within approximately 4 seconds
to activate the wash program.
5) If the door is not closed within approximately 4 seconds, the unit will not start the wash program.
6) In this case, you must open the door press the “START/PAUSE” button again and close the door within 4
seconds to activate the wash program.
Wash Options:
HALF LOAD:
This option allows you to save energy and wash a smaller load. This option should be used when washing
less than a full load or in the event you do not want to load the washer and run later when completely loaded.
SANITIZE:
When the Sanitize option is selected, the water temperature will be maintained at 156ºF/69ºC (maximum). The
maximum temperature may not be reached if the incoming water temperature is not adequate.
Residential dishwashers are not intended for licensed food establishments or Commercial applications.
HI-TEMP:
When the HI-Temp option is selected, the water temperature will be maintained at 140ºF/60ºC (maximum).
The maximum temperature may not be reached if the incoming water temperature is not adequate.
Residential dishwashers are not intended for licensed food establishments or Commercial applications.

Avanti DWT18V3S Specifications

General

Brand	Avanti
Model	DWT18V3S
Category	Dishwasher
Language	English