To Next PageTo Next PageWhat to do if my Avanti TD-25 does not operate?
If your Avanti Convection Oven isn't operating, start by ensuring it's properly plugged into a 120V AC/60 Hz electrical outlet. Also, check your circuit breaker or fuse box. Finally, verify that the function, temperature, and timer selectors are correctly set and that you've pressed the start button.
Why are foods overcooked or undercooked in my Avanti Convection Oven?
Overcooked or undercooked foods in your Avanti Convection Oven can often be fixed by adjusting the temperature to the desired setting. Also, make sure the rack is placed correctly to accommodate the food you're cooking.
Why are the heating elements not heating up in my Avanti Convection Oven?
If the heating elements in your Avanti Convection Oven are not heating up, ensure the function selector is set to the desired cooking setting. The heating elements will cycle to maintain the correct temperature.
Why does my Avanti TD-25 have a burnt smell?
A burnt smell from your Avanti Convection Oven could be due to a few reasons. If it's the first time you're using the unit, this might be part of the initial burn-in procedure. Otherwise, check for food buildup inside the appliance, on the heating elements, or in the drip/baking pan. Refer to 'Cleaning Your Appliance' for cleaning instructions.
Why is only one heating element heating up in my Avanti TD-25?
The function setting you've selected on your Avanti Convection Oven determines which heating element will operate. When toasting and using convection, make sure the oven is not set to BROIL or other inappropriate settings.
General| Capacity | 0.9 cu. ft. |
|---|---|
| Power | 1500 Watts |
| Temperature Range | 200°F - 450°F |
| Timer | 60 minutes |
| Type | Convection Oven |
| Voltage | 120 Volts |
| Cooking Modes | Bake, Broil, Toast |
| Interior Dimensions | 11.5 x 8.5 inches |
| Material | Stainless Steel |
| Accessories | Crumb Tray |
| Features | Removable Crumb Tray |
