Why does my Avanti W711 Washer not operate?
If your Avanti Washer isn't operating, there are a few things to check: * Make sure the washer is plugged in. * Check the circuit breaker or fuse. * Ensure the lid is completely closed. * Verify that the water source is turned on.
Why is my Avanti W711 vibrating or too noisy?
If your Avanti Washer is vibrating or making too much noise, consider the following: 1. Check that the washer is level. 2. Ensure the washing machine isn't touching any other objects. 3. Make sure the laundry load is balanced.
Why is there no water in my Avanti Washer?
If your Avanti Washer isn't getting enough water, try these steps: * Make sure the water source faucet is fully turned on. * Check if the water source hose is frozen. * Ensure the water intake hose isn't bent. * Inspect the filter on the water intake hose for clogs.
What to do if my Avanti W711 does not spin?
If your Avanti Washer isn't spinning, here are a couple of things to check: * Ensure that the lid is completely closed. * Verify that the washer is on a level surface.
What does error code E6 mean on my Avanti Washer?
If your Avanti Washer displays Error Code “E 6”, it indicates that the top cover is open or there is a door lock malfunction. During operation, the top may be open, so ensure that you close the top. It may also mean that the door lock has malfunctioned.
What to do if my Avanti W711 Washer does not drain?
If your Avanti Washer isn't draining, it might be because the drain hose is squashed or bent.
What does error code E1 mean on my Avanti W711 Washer?
If your Avanti Washer displays Error Code “E 1”, this indicates a malfunction in the water supply valve. This could be due to no water, a water supply valve time-out, or a clogged water valve.
What does error code E3 mean on my Avanti W711?
If your Avanti Washer displays Error Code “E 3”, it means the unit is unbalanced during operation. Stop the unit, shift the load evenly, and then restart it.
What does error code E4 mean on my Avanti W711?
If your Avanti Washer displays Error Code “E 4”, it indicates a malfunction of the water drain pump.
Key safety instructions to reduce risk of fire, electric shock, or injury.
Warnings about child entrapment and how to prevent it when discarding the appliance.
Criteria for choosing an appropriate installation location for the washer.
Importance of proper grounding for electrical safety.
Steps for initial setup, connections, loading, detergent, and lid closure.
Advice on mixing article sizes and loading them loosely for best results.
How to select cold, warm, or hot water temperatures for washing.
How to clean the exterior, interior tub, and inlet filter.
A guide to diagnose and solve common washer problems.
Contact details for product information, parts orders, and repair service.
List of conditions and factors not covered by the warranty.
General| Capacity | 1.6 cu. ft. |
|---|---|
| Weight | 63.8 lbs |
| Capacity (cu. ft.) | 1.6 |
| Color | White |
| Control Type | Electronic |
| Number of Wash Cycles | 8 |
| Maximum Spin Speed (RPM) | 700 |
| Voltage | 120V |
| Depth (in.) | 23.6 |
| Spin Speed | 700 RPM |
| Programs | 8 |
| Power Supply | 120V / 60Hz |
To Next Page
