EasyManua.ls Logo

Avantone Pro CLA-200 - Specifications; Warranty and Service Information; USA Service Contact; International Service Contact

Avantone Pro CLA-200
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPECIFICATIONS
8Ω Stereo Power (1KHz): 200W
4Ω Stereo Power (1KHz): 300W
8Ω Bridge Power (1KHz): 500W
Slew rate (at 1KHz): 28V/us
Input Sensitivity (1KHz): 0.775V (0dBU)
Total Harmonic Distortion (1KHz): 0.1%
Intermodulation distortion (at 10% rated power 1KHz): 0.1%
Crosstalk: -70dB
Frequency Response: 20Hz-20kHz +/-0.5dB
Input Impedance: (Balanced) 20KΩ (Unbalanced) 10kΩ
Damping Factor(100Hz, 8Ω): 250
Signal to Noise Ratio (A Weighted): >103dB
AMPLIFIER: Class AB
CABINET DIMENSIONS: 270Wx360Hx385D (10.6”x14.2”x15.2”)
WEIGHT: 20kg (44lb)
The AVANTONE ABBEY Monitors comply with all applicable / RoHS/
WEEE European Union directives.
Do not attempt to service this unit yourself, as it will void your warranty.
Please check your unit carefully upon receipt and return to place of
purchase immediately if there are any problems with the product. After
that, the standard AVANTONE 5 YEAR warranty will apply to defects in
materials and workmanship.
(U.S.A.) Should your AVANTONE product require service, please contact the
AVANTONE PRO Service Department. +1 845 642 3697-or- e-mail
info@avantonepro.com. You must obtain an RA # (Return Authorization
number) from us before shipping a unit back to us. This RA # must be
clearly written on the outside of the box.
Please safely pack the units…It is best to use the original packing
materials. AVANTONE PRO cannot be responsible for any damages
incurred in shipping to us due to poor packaging. PLEASE PACK
CAREFULLY and FULLY INSURE THE SHIPMENT.
(INTERNATIONAL) For service or warranty assistance, please contact the
AVANTONE PRO distributor in your country through the dealer from whom you
purchased this product.