ON OFF
Getting Started
The two speakers facing upward
SLUMBER
User Manual
7
EN
You can use the Slumber by either placing it on top of your existing
pillow, or by inserting it into your pillow cover. Make sure both
speakers are facing upwards.
STEP 1
The Slumber must be connected to a power source via the
provided power cable in order to function. Plug the provided type C
charging cable into the charging port, then connect the other end
to a 5V/500mA-2A rated USB adapter (your phone charger or similar
should work) or PC USB port.
STEP 2
Slide the switch to the “ON” position to turn the Slumber on.
(5V/1A-2A) (not included)
To Next Page
Loading...