How to Jump Start Your Vehicle
This unit is designed for jump starting 12V car batteries only and rated for
gasoline engines up to 7 liters and diesel engines up to 4 liters.Do not
attempt to jump start vehicles with a higher battery rating, or different
voltage.If the vehicle isn't started immediately, please wait for 1 minute to
allow device to cool down. Do not try to restart the vehicle after three
consecutive attempts as this may damage the unit. Check your vehicle for
other possible reasons why it can't be restarted.
First step: Second step: Third step:
Fourth step:
Press the power
button to turn on
it,check the
battery shown on
the LED
display,then plug
jumper cable into
battery pack
outlet.
Connect the
jumper clamp to
car battery,red
clamp to
positive,black
clamp to negative
pole of car battery.
Turn on the car
engine to start car.
Pull the plug of
battery terminal
from jump starter
and remove
clamps from auto
battery.
Operating instructions
06
To Next Page
Loading...
