Only use the regulator and hose assembly provided with this unit. Replacement parts must be
supplied directly by us .
Inspect the burner before use of this unit. If the burner shows any kind of damage, do not
operate the appliance. For assistance with repair or replacement of the burner or any other
parts, contact to us.
NOTE: You must follow all steps to properly assemble this heating item. Make sure the gas
valve is turned “OFF” before assembling. Do NOT attempt to assemble without proper tools.
SAFETY INFORMATION
Min. Clearance
48 in. (121.9 cm)
Min. Clearance
60 in. (152.4 cm)
Min. Clearance
48 in. (121.9 cm)
Combustible materials should not be within 60
inches of the top of the unit, or within 48 inches
around the entire unit.
To Next Page
Loading...