Need help?Do you have a question about the Avaya IP Office 3.0 and is the answer not in the manual?
Describes the IP403 Office base unit, expansion, and integral modules.
Steps for unpacking, checking, and assembling system modules.
Lists necessary tools and details PC connection for programming.
Covers initial setup and installation of the administration suite.
Covers procedures for upgrading system software.
Steps for checking, connecting, and testing telephones.
Details pin configurations for various ports on IP Office units.
Describes SNMP agent implementation and how to configure it.
Lists MIBs supported and instructions for loading them into NMS.
Describes the IP403 Office base unit, expansion, and integral modules.
Steps for unpacking, checking, and assembling system modules.
Lists necessary tools and details PC connection for programming.
Covers initial setup and installation of the administration suite.
Covers procedures for upgrading system software.
Steps for checking, connecting, and testing telephones.
Details pin configurations for various ports on IP Office units.
Describes SNMP agent implementation and how to configure it.
Lists MIBs supported and instructions for loading them into NMS.
General| Model | IP Office 3.0 |
|---|---|
| Maximum IP Users | 256 |
| VoIP Channels | 64 |
| Analog Ports | Up to 32 |
| Maximum Analog Stations | 32 |
| System Type | IP PBX |
| Supported Protocols | H.323, SIP |
| Supported Trunk Types | Analog, Digital, SIP |
| Networking | IP |
| Features | Voicemail, Auto Attendant, Call Center |
| Power Supply | AC 100-240V |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Humidity | 10% to 90% non-condensing |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
To Next Page
