CRK; Reviewed:
SPOC 9/23/2011
Solution & Interoperability Test Lab Application Notes
©2011 Avaya Inc. All Rights Reserved.
6. Configure Polycom® SoundStation® IP 7000
This section provides steps to configure SoundStation IP 7000. The latest firmware was
provided by Polycom, firmware version 3.3.1. The following steps are needed to configure
SoundStation IP 7000 so that it registers with Avaya IP Office. Power cycle SoundStation IP
7000. While the phone boots up, select the Setup menu from the phone, and enter the
administrator password (factory default password is 456). Provide the following information:
Phone IP address (during the compliance test, a static IP address was used)
Subnet Mask
IP Gateway
In the Server Menu,
o Set Server Type to TFTP.
o Provide the Server Address
DNS Domain
In the Syslog Menu,
o Set Server Address to the IP address of Avaya IP Office.
o Set Server Type to UDP (during the compliance test, UDP was used)
o Select the Exit button to continue to boot.
Once the phone has completed the booting process, launch a web browser, enter http://<IP
address of SoundStation IP 7000> in the URL, and log in with the appropriate credentials. The
screen below is displayed
To Next Page
Loading...