EasyManua.ls Logo

Avem quirks Medisafe - User Manual

Avem quirks Medisafe
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Avem Quirks
National Service Support Line: 1800 658 120
User Guide

Table of Contents

Questions and Answers

  • M
    Mr. Joseph JohnsonAug 3, 2025
    Why is my Avem Quirks Refrigerator temperature too high?
    • M
      Melissa ConwayAug 3, 2025
      To prevent the Avem Quirks Refrigerator from running too warm, make sure it's not in direct sunlight or an area exceeding 30°C. Also, ensure the condenser coil at the back is clean and has adequate airflow for heat dissipation. Check that the door is not left open. Check that the seal has not been damaged, allowing cold air to escape from the refrigerated cabinet. If a new seal is required, please contact Avem Quirks Australia.
  • A
    Ashley Mueller MDAug 11, 2025
    How to fix an Avem Quirks Refrigerator that will not run?
    • K
      Kimberly HillAug 11, 2025
      If your Avem Quirks Refrigerator won't run, the issue might be a lack of power. Check that the unit is receiving adequate power. Before turning on check to see if it is safe! Check the fuses from the main power supply.
  • C
    Christopher HoltAug 18, 2025
    What to do if LogTag Analyser displays erroneous readings in Avem Quirks Refrigerator?
    • B
      Bryan CoxAug 18, 2025
      If the LogTag Analyser software displays incorrect readings or missing temperature data (
  • B
    bstoneAug 27, 2025
    Why is LogTag not recording in my Avem Quirks Refrigerator?
    • J
      jscottAug 27, 2025
      If the LogTag isn't recording (OK and/or ALERT indicators do not flash) on your Avem Quirks Refrigerator, make sure the temperature probe (white cable at the back of the control unit) is connected to the LogTag recorder. Also, confirm the LogTag has been configured by following the process in Step 5 Configuring the LogTag Recorder on Page 8. Ensure the Start button is pushed to begin recording, acknowledged by flashing of the OK and ALERT indicators.

Summary

Quick Start Checklist

Pre-Stocking Operations

Monitoring Setup

Installing LogTag software and configuring the recorder.

Final Stocking and Optional Features

Getting Started and Installation

Initial Handling and Safety

Wait time after shipping, electrical safety precautions, and recommended servicing.

Refrigerator Placement and Power

Refrigerator Operation and Alarms

Stocking the Medisafe Refrigerator

Guidelines for airflow, stock distribution, and placement to maintain temperature.

Silencing the Alarm

How to silence audible alarms and understanding initial startup alarms.

Medisafe Control and Monitoring System

Temperature Control System

Electronic control maintains +2 to +8°C using a probe and thermostat.

Alarm and Delay Functions

Auto-Dialler Setup and Operation

Programming and Erasing Numbers

Steps to program and erase phone numbers via keypad commands.

LogTag Temperature Recorder Overview

Recorder Functionality

Records vaccine temperature data over time using a probe.

Data Download and Audit Use

Download via software for regulatory audits and insurance claims.

Critical Handling and Temperature Advice

Immediate PC connection and handling out-of-range temperatures.

Using the LogTag Recorder Software

Software Compatibility and Installation

Supported OS and steps for installing the LogTag Analyser software.

Starting the Analyser Software

Connecting and Using the LogTag Interface

USB Interface Connection

Locating USB ports and ensuring software installation before connecting.

Inserting and Downloading with LogTag

Accessing LogTag Configuration Wizard

Configuring the LogTag Recorder Settings

Setting Recording Start Method

Continuous Reading Configuration

Setting to record continuously and overwrite old data.

LogTag Recorder Configuration Details

Logging Interval and Start Delay

Indicator and Alert Settings

Configuring OK/Alert indicators and alert conditions.

Finalizing Configuration

Recording and Retrieving LogTag Data

Initiating LogTag Recording

Connecting the recorder and pressing Start to begin data logging.

Data Download Process

Connecting to PC, opening software, inserting LogTag for automatic download.

Troubleshooting Refrigerator Issues

Service and General Checks

Importance of qualified service and basic checks for common problems.

Temperature Regulation Problems

System Pressure and Compressor Faults

Advanced LogTag Troubleshooting

LogTag Battery and Communication Issues

Data Integrity and Missing Readings

Avem quirks Medisafe Specifications

General IconGeneral
BrandAvem quirks
ModelMedisafe
CategoryRefrigerator
LanguageEnglish