To Next PageTo Next Page
Need help?Do you have a question about the Aventics EV07 and is the answer not in the manual?
Specifies applicable pressure regulators and intended audience of the documentation.
Explains the format and meaning of safety warnings and signal words used.
Lists and defines abbreviations used throughout the manual.
Defines the proper applications and limitations for the EV07 pressure regulator.
Outlines non-permitted uses and disclaims AVENTICS GmbH's liability for damages.
Details the necessary skills and training for personnel handling the device.
Provides essential safety rules for accident prevention and environmental protection.
Covers risks like ESD, mechanical loads, reverse polarity, and opening the device.
Addresses malfunctions due to blocked ventilation ports or oily atmospheres.
Introduces the EV07 pressure regulator and its primary function.
Identifies physical components and outlines pneumatic/electrical connections.
Covers secure fastening, port clearance, and installation conditions.
Details checks for seals, atmosphere, correct power sequencing, and supply pressure.
Instructions for inputting the desired set point for pressure regulation.
Explains how the EV07 regulates pressure based on set points and internal sensors.
Outlines steps for safely disassembling, exchanging, and disposing of the device.
Provides guidance on disposing of the product according to applicable regulations.
Details how to clean the device and notes on maintenance.
Addresses issues like no pressure, low pressure, slow response, and leaks.
Lists key technical parameters for pneumatics and electronics.
Lists relevant industry standards the product adheres to.
Refers users to the online catalog for available accessories.
Specifies applicable pressure regulators and intended audience of the documentation.
Explains the format and meaning of safety warnings and signal words used.
Lists and defines abbreviations used throughout the manual.
Defines the proper applications and limitations for the EV07 pressure regulator.
Outlines non-permitted uses and disclaims AVENTICS GmbH's liability for damages.
Details the necessary skills and training for personnel handling the device.
Provides essential safety rules for accident prevention and environmental protection.
Covers risks like ESD, mechanical loads, reverse polarity, and opening the device.
Addresses malfunctions due to blocked ventilation ports or oily atmospheres.
Introduces the EV07 pressure regulator and its primary function.
Identifies physical components and outlines pneumatic/electrical connections.
Covers secure fastening, port clearance, and installation conditions.
Details checks for seals, atmosphere, correct power sequencing, and supply pressure.
Instructions for inputting the desired set point for pressure regulation.
Explains how the EV07 regulates pressure based on set points and internal sensors.
Outlines steps for safely disassembling, exchanging, and disposing of the device.
Provides guidance on disposing of the product according to applicable regulations.
Details how to clean the device and notes on maintenance.
Addresses issues like no pressure, low pressure, slow response, and leaks.
Lists key technical parameters for pneumatics and electronics.
Lists relevant industry standards the product adheres to.
Refers users to the online catalog for available accessories.
General| Series | EV07 |
|---|---|
| Operating voltage | 24 V DC |
| Protection class | IP65 |
| Electrical connection | M12 |
| Ambient temperature range | -5 ... 50 °C |
| Housing material | Plastic |
