AVer H300 User Manual

3
Contact Support
Tel: (877)528-7824
Email: support.cpdusa@aver.com
www.averusa.com/communication
©2011 by AVer Information Inc. All rights reserved.
No part of this document may be reproduced or transmitted in any form, or by any means without the prior written permission of AVer
Information Inc. AVer Information Inc. reserves the rights to modify its models, including their characteristics, specifications, accessories and
any other information stated herein without notice. The official printout of any information shall prevail should there be any discrepancy
between the information contained herein and the information contained in that printout. “AVer” is a trademark owned by AVer Information
Inc. Other trademarks used herein for description purpose only belong to each of their companies.
Locate the MIC IN port of the Table Hub and use the supplied 6P4C cable then connect it to the speakerphone mic port.
• The included Mic cable (6P4C) is 10 ft long
Use an RJ-45 Ethernet cable to connect the LAN port of the Main System to a RJ-45 wall jack or Ethernet hub.
• Make sure to connect it to an IP-based network
Connect the power adapter to a standard 100V~240V AC power outlet.
• To prevent shock, make sure all other ports in the main system are connected before connecting and turning on the power
• Make sure to use the supplied 19V power adapter
6. Connecting the MIC
7. Connecting the LAN and the Power

AVer H300 Specifications

General

Brand	AVer
Model	H300
Category	Conference System
Language	English