AVer PTC300V2 Series User Manual

29
Priority Group
When multiple groups are sharing the same camera and connection type, and
when their paired microphones detect the same voice from a person at the same
time, the camera will only move to the preset position of the Priority Group.
To set up a group as the Priority Group:
1. Make sure the group is enabled and well-connected.
2. Hover your cursor over a group, and click the icon.
3. Click Priority, this group will be marked with the icon.
4. To disable priority, click Priority again.

AVer PTC300V2 Series Specifications

General

Model	PTC300V2 Series
Preset Positions	256
Audio Output	Line-out
AI Tracking	Yes
Type	PTZ Camera
Lens	12X Optical Zoom
S/N Ratio	> 50dB
Pan Movement	+170° ~ -170°
Tilt Movement	-30°~90°
Pan/Tilt Range	Pan: 360°, Tilt: -30°~90°
Tilt Speed	1° ~ 120°/sec
Video Output	HDMI, 3G-SDI
Audio Input	Mic-in/Line-in
Network Interface	RJ45
Control Interface	RS-485, RS-232
PoE	PoE+
Dimensions (Φ)	Φ200mm
Day/Night	Yes
Video Compression	H.264, H.265, MJPEG
Network Interface Type	10/100/1000 Mbps
Power Supply type	PoE+
Image Sensor	1/2.8" Exmor CMOS
Output Resolution	1080p