Need help?Do you have a question about the Avery Weigh-Tronix ZQ375 Checkweigher and is the answer not in the manual?
General| Material | Stainless Steel |
|---|---|
| Display | LCD |
| Communication Interface | RS-232, USB |
| Operating Temperature | -10°C to +40°C |
| Power Supply | 100-240 VAC |
| Humidity Range | 85% RH non-condensing |
Details on equipment installation, safe battery handling, and considerations for wet conditions.
Guidance on regular checks, calibration, and cleaning procedures for the machine.
Steps for unpacking, placing, and leveling the scale unit for initial operation.
Explains tolerance entry, numeric entry, and ID entry procedures for scale configuration.
Details on powering the unit, battery options, and checkweigher operation on battery power.
Information on the optional light stack for visual weight status indication.
Covers gross weighing and tare/net weighing procedures for the scale.
Details on setting target weight, viewing and setting high/low tolerances for Sim375.
Covers checkweighing, negative checkweighing, and sample mode operations.
Guides on sampling methods, manual target entry, and setting target/tolerance values.
Covers Adv375 checkweighing, including PLU database functionality.
Setting target weights, viewing and setting upper/lower tolerances for Adv375.
Covers Per375 checkweighing, focusing on percentage-based weight adjustments.
Procedure for setting target percentages and performing checkweighing.
To Next Page