AVF CPZL8601-E User Manual

CPZL8601-E
Leaflet No. / No. de folleto 466046 rev 00
English language / Idioma Español
Read through ALL instructions before commencing installation.
If you have any questions about this product or issues with installation contact
the customer services help line before returning this product to the store.
See www.cmx.avfgroup.com/p/pzl8601-e for installation video
Lea todas las instrucciones antes de comenzar la instalación.
Si tiene alguna pregunta sobre el producto o problemas con la instalación.
llame a la línea de servicio al consumidor antes de devolverlo.
Vea www.cmx.avfgroup.com/p/pzl8601-e para el video de instalación
68kg
150lbs
90"
228cm

AVF CPZL8601-E Specifications

General

Brand	AVF
Model	CPZL8601-E
Category	Racks & Stands
Language	English

Summary

Important Safety and Installation Guidelines

STOP Installation Warnings

Read all instructions before installation. Contact customer service for issues.

ALTO Installation Warnings

Lea todas las instrucciones antes de comenzar. Llame a servicio al consumidor ante problemas.

Product Specifications and Load Capacity

Supports TVs 76cm-228cm (30-90in) and up to 68kg (150lbs).

Tools and Components Overview

Tools Recommended for Installation

List of tools required, including stud finder, drill, and tape measure.

Boxed Parts Identification

Visual guide to identify main bracket components labeled A, B, and C.

TV Screw, Reducer, and Spacer Details

Step 1: Measure TV Fixing Holes

Step 2: Prepare TV Brackets for Wall Clearance

Check for TV-to-Wall Clearance

Ensure TV brackets do not clash with the wall when tilted.

Using Adapters for Tilt Clearance

Use adapters C to position brackets B closer to the TV for tilt.

Step 3: Fit TV Brackets to TV

Installation for Flat TV Backs

Instructions for TVs with a flat or unobstructed back panel.

Installation for Obstructed TV Backs

Instructions for TVs with irregular backs using spacers.

Step 4: Determine TV Position on Wall

Align Template L for Wall Marking

Align template L with TV top/bottom to mark height and center.

Mark Wall Position with Template and Part A

Use template L and part A to determine and mark the final TV position.

Step 5: Fit Wall Bracket

Mounting to Wood Studs

Instructions for securing the wall bracket to wooden studs.

Mounting to Solid Walls (Concrete)

Instructions for securing the wall bracket to solid walls using anchors.

Step 6: Connect and Level the TV

Attaching TV to Wall Bracket

Hanging the TV onto the mounted wall bracket.

TV Levelling and Tilt Adjustment

Adjusting nuts for TV levelling and tilt tension.