To Next PageTo Next PageWhy are the lights not working on my AVG DAKOTA-AVD-306PSB?
If the lights on your AVG Ventilation Hood aren't working, the most likely cause is broken or faulty LED lamps. To resolve this, replace the LED lamps following the provided instructions.
How to improve suction on my AVG DAKOTA-AVD-306PSB Ventilation Hood?
If your AVG Ventilation Hood has insufficient suction, it's likely because the distance between the hood and the cooking surface is too great. Reinstall the range hood to the correct distance to improve suction.
What to do if the light is on but the motor doesn't work on my AVG DAKOTA-AVD-306PSB Ventilation Hood?
If the light is on but the motor of your AVG Ventilation Hood isn't working, the fan switch may be turned off. Try selecting a fan switch position. If that doesn't work, the fan switch or the motor may have failed, and you should contact a service center.
How to fix oil leakage from my AVG DAKOTA-AVD-306PSB?
If your AVG Ventilation Hood is leaking oil, it could be due to the check valve and outlet not being tightly sealed or leakage from the connection of the exhaust duct and cover. Try these steps: * Take down the check valve and seal with sealant. * Take the exhaust duct down and seal it.
General| Brand | AVG |
|---|---|
| Model | DAKOTA-AVD-306PSB |
| Category | Ventilation Hood |
| Language | English |
Step-by-step guide for installing the range hood, including critical measurements and mounting.
Instructions for correctly installing the micro-mesh filters into the range hood.
Detailed steps and specifications for replacing the LED lamps in the range hood.
Explanation of the power button, lamp button, speed controls, and timer functions.
Instructions for general cleaning, control panel care, and cleaning grease mesh filters.
