AVGO CM1551 - User Manual

Questions and Answers

L
Lisa VegaAug 2, 2025
What to do if there is no sound from my AVGO Speaker System?
- A
  amy06Aug 2, 2025
  If there is no sound or the sound is distorted on your AVGO Speaker System, here are a few things to check: * Ensure the audio cables are securely connected. * Increase the volume if it's set too low. * Make sure the sound isn't muted by pressing the [MUTE] button on the remote. * Press [PLAY/PAUSE].
C
Crystal VelazquezAug 7, 2025
Why doesn't my AVGO CM1551 Speaker System remote control work?
- R
  Russell FlynnAug 7, 2025
  If the remote control for your AVGO Speaker System isn't working, try these steps: 1. Install a new AAA/1.5V battery or replace the old batteries with new ones. 2. Ensure that the remote control is pointed towards the remote sensor on the unit. 3. Make sure the remote control is within its operating area. 4. If the unit is shut down, switch it off, disconnect it from the AC outlet, and then power it on again.
I
iturnerAug 12, 2025
How to fix no power issue on AVGO Speaker System?
- D
  David MartinAug 12, 2025
  If your AVGO Speaker System has no power, verify that the AC power cord is securely connected to both the speaker and the power supply.
M
Malik BrownAug 17, 2025
What to do if my AVGO Speaker System won't play a disc?
- N
  Nathan MorganAug 17, 2025
  If your AVGO Speaker System is unable to play a disc, ensure that the disc is placed in the disc tray with the label side facing upwards. Also, clean the disc.
M
michellesheppardAug 22, 2025
Why does my AVGO Speaker System stop when I plug in a USB drive?
- B
  brian31Aug 22, 2025
  If your AVGO Speaker System stops when you insert a USB drive, it might be because the USB drive is not certified. The player cannot play any uncertified USB drive. If the player breaks down, turn it off, disconnect the power cord from the AC outlet and unplug the USB drive from the player. Then, power on the player again to resume normal functions.
J
Joshua DavisAug 27, 2025
What to do if the buttons on my AVGO CM1551 aren't working?
- L
  lopezmistyAug 27, 2025
  If the buttons on your AVGO Speaker System do not work, the unit might be interfered with static electricity. To resolve this, switch off and unplug the unit. Then, connect the plug to the power supply and switch it on again.