Avia Propeller V510 Series

Need help?

Do you have a question about the Avia Propeller V510 Series and is the answer not in the manual?

Summary

1. Airworthiness Limitations

A. Life Limits

5. Installation and Operation Instructions

A. General Installation

C. Installing the Blades

Provides instructions for installing propeller blades into the hub, ensuring correct positioning.

D. Installing the Propeller on the Engine

Outlines the steps for mounting the propeller onto the engine.

H. Basic Adjustment After Installation

I. Testing Procedures

Details the procedures for ground and flight testing of the propeller system.

J. Propeller Removal from Engine

K. Minimum Flight Angle Adjustment (V508 H)

Explains how to adjust the minimum flight angle for V508H models.

6. Inspections

A. Pre-Flight Check

Outlines the visual checks to be performed before each flight.

B. 300-Hour; Annual Inspection

C. 900-Hour; Two-Year Inspection

E. Special Inspections

Details special inspection procedures for events like overspeed, lightning, foreign object strike, fire, oil contamination, hard landing.

8. Troubleshooting

A. Normal Operation Issues

Addresses common issues encountered during normal propeller operation.

11. Propeller Control System

11.3 Propeller Control Principles

C. Beta Mode of Operation

D. Feathering Procedures

Details the procedures for feathering the propeller, including manual and emergency methods.

11.4 Governor Installation on Engine

Provides detailed steps for installing propeller governors (LUN7815.02, LUN7815.03).

11.5 Governor Removal from Engine

11.6 Basic Adjustment After Installation

11.7 Testing Procedures

Describes ground testing procedures for the propeller control system with LUN7815 governors.

11.8 Further Adjustment

11.9 Troubleshooting

11.10 Maintenance Practices