To Next PageTo Next Page
Need help?Do you have a question about the Aviation Design Rafale C and is the answer not in the manual?
General| Brand | Aviation Design |
|---|---|
| Model | Rafale C |
| Category | Toy |
| Language | English |
Overview of components and features included in the Rafale model kit.
Instructions for preparing fiberglass surfaces for optimal glue adhesion.
Recommended methods and adhesives for assembling model parts.
Instructions for assembling the front fuselage for Air Force and Navy versions.
Assembly and installation of landing gear doors and their air cylinders.
Steps for assembling and fitting the rear landing gear door.
Detailed assembly of main gear doors, wheels, brakes, and struts.
Installation of details and lights on the front landing gear.
Installing and connecting servos for the canard control surfaces.
Gluing fairings and adjusting elevon movements for proper control.
Instructions for cutting, fitting, and securing the air inlets.
Assembly of fuel tank support and connection of fuel tanks.
Installing wing servos and securing wings with locking systems.
Attaching wing tip missiles and underwing fuel tanks.
Fitting the vertical fin and attaching the rudder.
Attaching pins and latches to main and front fuselage hatches.
Fitting front, rear, and clear canopies.
Painting and assembling the cockpit interior components.
Final assembly of cockpit parts and fitting ejector seats.
Diagram and instructions for air system installation in the Air Force version.
Diagram and instructions for air system installation in the Navy version.
Installing the tailcone and LED lighting for the afterburner.
Gluing ABS parts and installing wing light systems.
Steps for installing the single turbine engine and related components.
Steps for installing the twin turbine engines and related components.
Advice on preparing parts for paint and general finishing.
Guidelines for painting the model and positioning batteries.
Requirements and setup for the radio system and servos.
Specifications for control surface throws and exponential settings.
Determining and adjusting the model's center of gravity for stable flight.
Information on the total weight of the completed model.
