- 91490 MILLY LA FORET – FRANCE - Tel : 01 64 98 93 93 - aviation.design@wanadoo.fr – www.aviation-design.fr
INTRODUCTION
ScoRpion is our new jet trainer. It is fully composite, delivered assembled and painted.
It is designed for jet beginner with following objectives :
- Very easy to fly.
- Short take off and landing due to big airfoil thickness (13%), large flaps and low wing loading
- Very fast assembly
- Easy access to engine (big engine hatch)
- Easy access to fuel tank, ECU and radio with a large fuselage hatch
- Easy radio installation with big fuselage hatch and servo cover supplied
It is designed for a 9 to 12 kg thrurst turbine.
The ScoRpion is fully molded in composite material.
The model comes to you finished, fully molded in composite material and painted in mold. All
bulkeads are glued. All control surfaces are hinged. No gluing is required. This model has plug in
wings and fins for an easier transport.
All necessary hardware is included in the parcel.
Assembly requires only few hours to fit engine and radio.
ScoRpion ARF model includes :
- High quality epoxy-glass fuselage painted.
- All plywood and wood parts premounted.
- Fully molded wings with winglets, stabs and fins painted
- High tensile aluminum wing joining tube.
- Access hatch and canopy requiring no additional framework.
- Fiber exhaust cone.
- All hardware (screws, servo cover, ...)
- Instructions in English with pics.
To Next Page
Loading...
