<TAKE CARE AND READ THIS MANUAL>
INTRODUCTION
Avid has long been recognised as a leading force in engineering British high-end turntables.
What might surprise some, is the technology and engineering involved in our Power supplies alone,
surpasses that inside most amplifiers.
Avid applied their engineering ability to design a phono-amplifier called the Pulsare, capable of
realising the full potential of not only their own, but all the current breed of world-class turntables.
The highly awarded Pulsare was followed with the launch of the Pulsus and following further
development and our ‘trickle down’ design policy we present the Pellar phonostage.
The Pellar phono stage is directly related to the Pulsus and has a common optimized internal circuit
design to minimize hum and noise while maximizing the signal headroom.
Designed, manufactured and tested entirely within our Huntingdon facility, the Pellar components,
PCBs and casework have all been optimised to create a product with the performance, longevity and
flexibility to provide a lifetime of service to the most discerning audiophiles.
We hope that you enjoy this product for many years!
WARNINGS
1. Do not expose either the power supply or phono unit to rain or moisture.
2. All components inside have been specifically optimised for the best quality reproduction. Tampering
will invalidate any warranty.
3. The Pellar contains voltages which can cause serious injury or death and there are no user
serviceable parts and there is no reason to open it. In situations of failure return to an approved
dealer or service agent or contact Avid directly.
4. The Pellar has a possible high output voltage and may overload pre-amplifiers if the wrong gain
setting is selected. Please check product manuals or your dealer for advice.
PACKAGING
Save all the packing in a dry place away from fire hazard. The Pellar is a precision instrument and the
packaging has been especially designed so that all component parts are safe during transportation.
You should not have occasion to return your unit to us, but if you need to, the unit must be shipped in
its original packaging to keep it from damage.
PARTS CHECKLIST
Quick Start Instructions 1 Pellar Phono Stage 1 Power Cord 1
RCA Loading Plugs 2
SERVICING
Because of the careful design of this product, general servicing is not required.
CLEANING
To maintain the visual appearance, occasionally dust the surfaces with a normal duster - no need for
any sprays or polishes. Never use cleaners containing abrasives, as this will damage the surface.
To Next Page
Loading...