Chapter 1: Introduction 1
Chapter 1: Introduction
The Avid
®
S6 Automation Module is the transport and automation master section module. It provides switches for time code and
transport operations, a Jog wheel, a numeric keypad, two banks of Soft Keys, and a fader strip.
Module Capabilities and Features
• 1 (one) fader strip
• 1 (one) Jog/Shuttle Wheel with Wheel mode switches
• Transport switches
• Numeric Keypad
• 2 (two) banks of Soft Key, each with high resolution TFT display
• Setup switch
• Timecode and Locate display and controls
• 2-pin 12V Power
• 1000-BaseT (Gigabit) Ethernet RJ45 connector
Automation Module
To Next Page
Loading...
