Need help?Do you have a question about the Avidity Science Duo Series and is the answer not in the manual?
Definitions for hazard symbols and special notices used in the manual.
Critical warnings for product operation and electrical safety.
Cautions regarding equipment damage from improper installation or use.
Contact details for technical assistance from Avidity Science.
Details on the different Duo water system models available.
Overview of the primary menus and sub-menus on the dispense controller.
Access and modify user-specific operational parameters.
Access and modify system-wide operational parameters (technician).
View usage hours for system consumables.
View and acknowledge active system alarms.
Select the user interface language.
Procedure for dispensing deionized water from the tank.
Procedure for dispensing Type 1 ultra-pure water.
Adjust the water dispense rate for Type 1 water.
Program the volume of water to be dispensed.
Procedure for sanitizing the Duo water system.
Procedure for replacing the pre-treatment module (TC001).
Procedure for replacing Endure Purification Packs (TC002/TC009).
Procedure for replacing the RO membranes.
Guidelines for autoclaving the optional Ultra Filter.
Procedure for replacing dispenser filters.
Procedure for replacing the air filter on the storage tank.
List of items requiring regular replacement.
List of available spare parts for the Duo unit.
List of replacement parts for external storage tanks.
General| Series | Duo Series |
|---|---|
| Manufacturer | Avidity Science |
| Power Requirements | 100-240V AC, 50/60 Hz |
| Operating Temperature | 5-40°C |
| Output Water Type | Type I, II, III |
| Installation | Benchtop or Wall Mount |
| TOC | <5 ppb |
| Dimensions (H x W x D) | Varies by model |
| Weight | Varies by model |
| Type | Water Purification System |
| Resistivity | >18.2 MΩ·cm |
To Next Page