Avidsen TEHA 410 User Manual

MOTOR DRIVE KIT
TEHA 410
With actuators – For two-panel swing gates
Ref. 114173
www.avidsen.com
V1
OPTION
SOLAIRE
OPTION
BATTERIE DE SECOURS
OPTION COMPATIBLE
SMARTPHONE
24V
L
1,75M
PAR BATTANT
150KG
PAR BATTANT
KG
COMPATIBLE TOUS
TYPES DE PORTAILS
PORTAIL
À BATTANT
EN
YEARS
3
24V 150KG
PER PANEL
SWING
GATE
COMPATIBLE WITH
WITH ALL TYPES
OF OPENWORK
GATES
SOLAR
OPTION
1.75M
PER PANEL
BACKUP BATTERY
OPTION
BACKUP BATTERY
SMARTPHONE
COMPATIBLE

Avidsen TEHA 410 Specifications

General

Brand	Avidsen
Model	TEHA 410
Category	DC Drives
Language	English

Summary

A - Safety Instructions

1 - Operating Precautions

Essential safety guidelines for using the automatic gate apparatus.

2 - Installation Precautions

Key safety measures and regulations to follow before gate installation.

3 - Maintenance and Cleaning

C - Installation

Hazard Analysis

1 - Eliminating Hazards

2 - Installing Actuators

Step-by-step guide for mounting the motor drive actuators.

3 - Installing the Switchgear

5 - Attaching the Set of Photocells

Procedure for installing photocell safety sensors for gate protection.

6 - Connections

Overview of electrical connections for the system components.

6.1 - The Mains Electricity

6.2 - Actuators

Detailed wiring guide for the motor drive actuators.

6.4 - Photocells

D - Beginning Operation

2 - Quick Settings

2.1 - Self-Learning

Procedure for the gate system to learn its travel limits.

2.2 - Adding Remote Controls

How to program and add remote controls to the system.

2.2.1. Programming with the Card

3. Advanced Settings

3.1. Menu 1

Configuration options for operating mode, time delay, force, and speed.

3.1.1. Operating Mode (Automatic Closing or Semi-Automatic Closing)

Selecting the gate's automatic or semi-automatic operation mode.

3.1.2. Time Delay (for Automatic Mode)

Adjusting the duration the gate stays open before automatic closure.

3.1.3. Motor Force

Setting the force exerted by the motors for obstacle detection.

3.1.4. Motor Speed

3.2. Menu 2

Configuration options for acceleration, photocells, and gate type.

3.2.1. Acceleration/Deceleration at End of Travel

3.2.2. Photocell Mode

Configuring the behavior of photocells during gate operation.

3.2.4. Stop Tolerance

3.3. - Menu 3

3.3.2 - Flashing Light Pre-Flashing Time

E - Use

1 - Warnings

General safety warnings for operating the automatic gate.

2 - Opening/Closing

2.2 - Operating Modes

2.2.1 - "Semi-Automatic Closing" Mode

Detailed description of semi-automatic gate operation.

2.2.2 - "Automatic Closing" Mode

Detailed description of automatic gate closing operation.

2.3 - Photocells (if Installed)

2.4 - Obstacle Detection

How the system responds to obstacles during movement.

2.5 - Manual Movement

F - Maintenance and Upkeep

1 - Maintenance Work

Guidelines for regular maintenance of the gate system.

2.1 - History of Events and Error Codes

G - Technical and Legal Information

1 - Technical Characteristics

Detailed technical specifications for system components.