EasyManuals Logo

Avigilon 1.0-H3-B1 User Manual

Avigilon 1.0-H3-B1
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
ii
English
Any external power supply connected to this product may
only be connected to another Avigilon product of the same
model series. External power connections must be
properly insulated.
Do not connect directly to mains power for any reason.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other sources of heat.
Do not subject the cables to excessive stress, heavy loads
or pinching.
Do not open or disassemble the device. There are no user
serviceable parts.
Refer all servicing to qualified personnel.
Servicing may be required when the device has been
damaged (such as from a liquid spill or fallen objects), has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
Do not use strong or abrasive detergents when cleaning
the device body.
Use only accessories recommended by Avigilon.
Use only UL-listed mounting bracket suitable for the
mounting surface and minimum 0.7 kg (1.5 lb) weight.
Use of controls or adjustments or performance of
procedures other than those specified in this document
may result in hazardous radiation exposure.
Caution — Failure to observe the following instructions may
result in injury or damage to the camera.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Avigilon 1.0-H3-B1 and is the answer not in the manual?

Avigilon 1.0-H3-B1 Specifications

General IconGeneral
BrandAvigilon
Model1.0-H3-B1
CategoryIP Camera
LanguageEnglish

Related product manuals