To Next PageTo Next Page
Need help?Do you have a question about the Avigilon 3.0W-H3-BO1-IR and is the answer not in the manual?
General| Model | 3.0W-H3-BO1-IR |
|---|---|
| Category | Security Camera |
| IR Distance | 30 m |
| Video Compression | H.264, MJPEG |
| Ingress Protection | IP66 |
| Weather Resistance | Yes |
| Environment | Indoor/Outdoor |
| Form Factor | Bullet |
| Sensor Type | 1/3" Progressive Scan CMOS |
| Lens | 3.0 mm |
| IR Range | Up to 30 m |
| Day/Night | Yes |
| Wide Dynamic Range | Yes |
| Operating Temperature | -40° C to +50° C (-40° F to +122° F) |
| Power Supply | PoE (IEEE 802.3af) |
| Power Consumption | 5.5 W |
| Frame Rate | Up to 30 fps at 2048 x 1536 |
Specifies compatible browsers and system requirements for accessing the camera web interface.
Details on using sliders and buttons to adjust camera zoom and focus for optimal viewing.
Describes how to save and recall specific camera positions and zoom configurations.
Procedure for capturing and saving a static image snapshot from the live video stream.
Explains how to control the pan, tilt, zoom, and focus of PTZ cameras via the web interface.
Details on controlling PTZ features for cameras connected through an H.264 encoder.
Basic device configuration including naming, location, and LED settings.
Settings for IP address acquisition, hostname, and network ports.
How to configure port-based network access control for secure network connections.
Adjusts video display properties like zoom, focus, exposure, iris, and color settings.
Configures video compression, image rate, quality, and bitrate for network streaming.
How to find and use the RTSP address to view live video streams in external applications.
Procedure to access and save the last recorded still image frame from the camera.
Configuration of motion detection areas, sensitivity, and threshold for triggering alerts.
Setting up masked areas within the camera's field of view to protect privacy.
Enables and configures the camera's onboard storage feature using an SD card.
Steps to activate and configure the camera's SD card for local video recording.
Procedures for downloading recorded footage from the web interface or SD card.
How to manually delete recorded video files or format the SD card.
Configuring external devices connected to the camera's input/output ports.
Adjusting audio input gain and output volume for connected microphone and speaker.
Manages user accounts, permissions, and general settings including adding, editing, and removing users.
Option to keep custom usernames and passwords after a firmware revert.
Performing system tasks like rebooting, restoring defaults, and upgrading firmware.
View system logs, access logs, and filter messages by severity level.
Configuring individual settings for each lens head on a multisensor camera.
Creating and managing automated PTZ camera movement sequences (tours).
Modifying existing PTZ tours, including adding, removing, or reordering presets.
Setting physical movement boundaries for PTZ cameras to avoid obstructions.
Choosing the specific camera or audio device connected to an encoder port for configuration.
Activating video input termination settings on the encoder.
Configuring PTZ controls for cameras connected via an H.264 encoder.
