1. On the Network page, click Configure 802.1X.
2. On the following page, select the preferred authentication method. You can configure multiple profiles
but only one can be enabled at a time.
From the EAP Method drop down list, select one of the following and complete the related fields:
l Select PEAP for username and password authentication.
o
Configuration Name: give the profile a name.
o
EAP Identity: enter the username that will be used to authenticate the camera.
o
Password: enter the password that will be used to authenticate the camera.
l Select EAP-TLS for certificate authentication.
o
Configuration Name: give the profile a name.
o
EAP Identity: enter the username that will be used to authenticate the camera.
o
TLS Client Certificate: select the PEM-encoded certificate file to authenticate the camera.
o
Private Key: select the PEM-encoded private key file to authenticate the camera.
o
Private Key Password: if the private key has a password, enter the password here.
o
Click Upload Files and the TLS Client Certificate and Private Key are uploaded to the
camera. The uploaded files are used to generate a unique certificate to authenticate the
camera. The unique certificate is displayed in the Uploaded Certificate field.
3. Click Save Config to save the authentication profile. If this is the first profile added to the camera, it is
automatically enabled.
4. To use a different authentication profile, select the saved configuration then click Enable.
5. To delete one of the authentication profiles, select the saved configuration then click Remove.
10 Configuring 802.1x Port Based Authentication
To Next Page
Loading...
