Avio PowerSense - User Manual

Avio Sports Limited, 4 Isis Business Centre, Pony Road, Oxford OX42RD
www.avio.mobi
Avio Quick Start Leaflet.pdf 1 24/10/2017 11:57
Quick Start guide
Pairing PowerSense®
with your head unit
Ensure your head unit is switch on.
Navigate to the settings menu on your head unit. Usually this is through the main
menu (refer to your user manual or check your device website for more info)
Sharply tap the crank PowerSense is affixed to, to turn it on.
Once PowerSense is on, it will broadcast and be visible on any ANT+ device
just like any other power-meter.
Select PowerSense in the menu, and add.
Find below an example of a connection on a Garmin 520
Data screens
Most head units will allow a degree of adjustability for the different things you can view whilst out
riding. You’ll view these different things on what’s referred to as pages.
Page 1 being the screen you use the most, screen two, usually a ‘specialist screen’ having things like
Power to Weight, %FTP and VAM as an example of a climbing page. Although we like the example
of having a sprint screen which has Power and a Timer and…well that’s it. Most people only have
3 pages and then their Map page, maybe their virtual partner page.
When you come to adjust your data screens we recommend you do it whilst out on a ride.
Only during then will you know what you really want to see. Try to do this whist out by yourself as this
could get very annoying for your mates, or very tiring for you when they don’ t wait up for you, like us,
we’d leave you there no worries at all.
Troubleshooting
Sometimes things don’t always go so smoothly. Whereas we’ve tried to make PowerSense as hassle
free as possible, things happen. If for some reason you can’t Connect or add PowerSense, we’ll need
to pull the battery, ‘Forget’ the device on your head unit, pop the battery back in, and then research.
Doing this, believe it or not, fixes a whole host of problems. *turns it off, and turns it back on again*
Any other problems you know where we are, right here: Support@avio.mobi

Summary

Pairing PowerSense with Your Head Unit

Data Screens

Troubleshooting Connection Issues

Troubleshoot Connection or Add Issues

Troubleshoot connection or add issues by pulling the battery and 'forgetting' the device.

Frequently Asked Questions

Bike Fit Compatibility

Confirm 11mm clearance between non-drive-side crank and chain stay for compatibility.

Installation Guide

Refer to the main website's 'Fitting' section for detailed crank installation instructions.

Head Unit Compatibility

Ensure your head unit supports ANT+ communication for PowerSense connectivity.

Swapping Between Bikes

PowerSense cranks can be swapped, but the sensor is permanently affixed.

Calibration Procedure

Calibrate by navigating to the Zero Offset screen, ensuring pedals are at 6 o'clock.

Professional Installation

Authorized dealers can fit the crank and show you how to calibrate PowerSense.

General Maintenance

Calibrate before each ride or weekly; clean carefully, avoid jet-washing.

Seeking Further Assistance

Check website/social media or contact Support@avio.mobi for help with issues.

Avio PowerSense Specifications

General

Power Supply	100-240V AC, 50/60Hz
Measurement Parameters	Voltage, Current, Power
Current Range	0-20A AC
Communication Interface	USB
Operating Temperature	0-40°C
Storage Temperature	-20-60°C
Humidity	10-90% RH, non-condensing