Aviom A-16II Quick Reference

2 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Save

Recall Group Solo Mute

Select

Mute

In Recall Mode

All volumes

Zero

1

2

3

4

5

6

7

Personal Mixer

A-16

by

1

5

4

2

2

3

Quick Reference

Mixing:

• Select a channel by pressing a numbered channel button.

• Adjust the volume by turning the Volume knob.

• Change the pan by turning the Pan knob.

Saving a Mix Preset:

• Press and hold the Recall and Group buttons; then press any

channel button. Flashing lights verify the save operation.

Recalling a Mix Preset:

• Press the Recall button; then select a channel button.

Other manuals for Aviom A-16II

User Guide58 pages

Questions and Answers:

V
Vanessa JacksonAug 15, 2025
How to troubleshoot no audio from Aviom Mixer outputs?
- J
  Juan PhillipsAug 15, 2025
  If you're not getting any sound from your Aviom Mixer outputs, start by checking the levels on the main mixing board connected to the system. Also, inspect the cables and connections between the main mixer and the personal monitor system. The signal LEDs on the front of the input module can help you confirm if audio is being received. Try replacing the cables to eliminate them as a potential issue. Ensure that all channels and the master volume on the personal mixer are not set to zero. Finally, verify that the A-Net cables are correctly connected.
J
Joseph AliAug 18, 2025
Why the A-Net LED is on but there is no sound from Aviom Mixer?
- J
  James ParsonsAug 18, 2025
  The A-Net Active LED indicates that the input to the receiving device is properly connected to another A-Net device. It doesn't guarantee that all devices in the system are correctly connected. If you have two Aviom Mixers connected, the second mixer's A-Net LED might light up simply because it's connected to the first. Ensure each device in the chain has a Category 5 cable plugged into it. Also, verify that the A-Net cables are connected in the correct order, with the cable from the first mixer connected to the A-Net In jack and subsequent devices connected from the Out of the previous device to the In of the next.

Aviom A-16II Specifications

General

Channels	16
Stereo Channels	8
Inputs	16
Output Type	Analog
Output	16
Network Protocol	A-Net
Power	12V DC
Power Supply	External
Sample Rate	48 kHz
Bit Depth	24-bit
Dimensions	1.75"
Input Connectors	RJ45
Output Connectors	1/4" TRS

Related product manuals

Preview: Aviom A360

Preview: Aviom A320