AvionTEq HEATCON HCS9000B - User Manual

HCS9000B/HCS9200B-OMI-405 18 November 2013
This Technical Manual Applies to HCS9000B and HCS9200B Revision 16
Composite Repair Sets (Hot Bonders) with Serial Numbers listed below:
Serial Numbers – 1611XXXX and Subsequent
HCS9000B / HCS9200B
Composite Repair Set; Hot Bonder
Operation and Maintenance Manual
with
Illustrated Parts Catalog
To buy, sell, rent or trade-in this product please click on the link below:
http://www.avionteq.com/Heatcon-HCS9200B-Single-Dual-Zone-Hot-bonder-Composite-Bonding-Repair-System.aspx
www.avionteq.com

Summary

CHAPTER 1 GENERAL

CHAPTER 2 FUNCTIONAL DESCRIPTION

2.4 OPERATOR INTERFACE AND DISPLAY

2.7 PROPORTIONAL, INTEGRAL AND DERIVATIVE (PID) CONTROL

Explains the heat control algorithm and its parameters.

CHAPTER 3 OPERATION

3.0 CONTROLS AND INDICATORS

Identifies and explains the physical controls on the unit's faceplate.

3.1 EQUIPMENT SETUP AND POWER-ON

Guides on positioning, connecting, and powering on the unit.

3.4 OPERATOR GRAPHIC USER INTERFACE SCREENS

3.4.2 MAIN MENU AND STATUS MONITOR SCREEN

3.4.4 PROGRAM SELECTION SCREEN

3.4.6 PRECURE OPERATIONAL TEST

Describes the pre-cure test for system functionality and layup verification.

3.7 ALARMS

Explains alarm conditions, types, and silencing procedures.

3.11 AUTOTUNE

CHAPTER 4 MAINTENANCE

4.4 OPERATIONAL TEST

CHAPTER 5 TROUBLESHOOTING

5.0 GENERAL TROUBLESHOOTING

Provides guidance on identifying and resolving common equipment failures.

AvionTEq HEATCON HCS9000B Specifications

General

Model	HCS9000B
Category	Measuring Instruments
Manufacturer	AvionTEq
Temperature Accuracy	±0.5°C
Resolution	0.1°C
Control	PID
Display	LCD
Power Supply	100 to 240 VAC, 50/60 Hz
Interface	Ethernet, USB
Weight	10 kg