Need help?Do you have a question about the Avipas AV-1280 and is the answer not in the manual?
Employs 1/2.8" high-quality CMOS sensor, up to 1920x1080 resolution at 60 fps.
Details sensor, scanning mode, lens, zoom, illumination, focus, aperture, shutter, white balance, BLC, noise reduction, SNR, and video adjustment.
Specifies baud rate, start bit, data bits, stop bit, and parity.
Press MENU to display main menu; use arrows to move cursor; HOME to enter sub-menu.
Configure protocol, Visca address, PELCO addresses, and baudrate.
Accesses camera settings like Exposure, Color, Image, Focus, etc.
Explains direct and IP connection modes for the camera.
Instructions for logging into the web client as administrator or normal user.
Configuration of data, web, Onvif, Soap, RTMP, RTSP, and Visca ports.
General| Camera Type | PTZ Camera |
|---|---|
| Digital Zoom | 12x |
| Effective Pixels | 2.07MP |
| Aperture | F1.6 ~ F3.5 |
| Shutter Speed | 1/30s ~ 1/10000s |
| Pan Movement | ±170° |
| Presets | 255 |
| Connectivity | HDMI |
| Image Sensor | 1/2.8" CMOS |
| Focus System | Auto/Manual |
| Minimum Illumination | 0.5 Lux @ F1.6 |
| White Balance | Auto/Manual |
| Backlight Compensation | Yes |
| Digital Noise Reduction | 3D DNR |
| Video Output | HDMI |
| Video Compression | H.264 |
| Audio Input | Line In |
| Control Interface | RS232, RS485 |
| Tilt Movement | -30° ~ +90° |
To Next Page