AVIRE AC-4CM10-620-F-20-000 User Manual

1
DCP
Digital Communication Platform
Installation Guide
Ref No MU7756XAV10A-AU
Part numbers:
3G DCP (RS232): AC-3CM10-620-F-20-000
4G Single SIM card (RS232): AC-4CM10-620-F-20-000
4G Dual SIM card (RS232): AC-4CM10-820-F-20-000
PRODUCT DESCRIPTION
The Digital Communications Platform (DCP) provides an information gateway between
all compatible connected Avire devices in the lift shaft and our online monitoring
platform the Avire Hub. The product is installed as a stand-alone device and doesn’t
require connection to the controller panel.
Dual SIM card DCP version only: A dual SIM card version allows switching from one SIM
to another in case the connection is lost. The dual SIM card version also allows the use
of one SIM card for voice and the other one for data only.
In the Box
+ 4G DCP (either single or dual version)
OR 3G DCP
+ Antenna
+ P-5 H-2V connector (x1)
+ P-3.5 H-4V connector (x1)
+ P-10 H-2V connector (x1)
+ Grey clamp (x2)
+ Manual
Not Included
+ Screwdriver
+ SIM card/s

AVIRE AC-4CM10-620-F-20-000 Specifications

General

Category	Conference System
Microphone	Condenser
Sensitivity	-38 dB ± 3 dB
Signal to Noise Ratio	>60dB
Color	Black
Cable Length	2m

Summary

Elevator Safety

Setting Up the DCP

SIM Card Unlocking

Option 2: DCP Programming via Phone

Program SIM PIN into DCP using an analogue phone connected to J1A or J9.

Option 3: Remote SMS Unlocking

Remotely enter SIM PIN code into DCP by sending an SMS command.

Setting Parameters on Non-Avire SIMs

Option 1: Super Settings Configuration

Configure APN settings quickly using country and provider tables.

Option 2: Manual APN Settings

Manually set APN settings by sending SMS commands for SIMO and SIM1.

Avire Hub Configuration

Configuring Elevator Groups and Elevators

Adding DCP Gateway in Avire Hub

Add the DCP 4G gateway to the Avire Hub configuration.

Reading DCP Parameters from Avire Hub

Read DCP parameters via the Avire Hub interface to confirm connection status.

Additional Information for DCP Programming

SMS Commands for DCP Configuration

Remotely configure DCP parameters using SMS commands with access code 'Pin1234'.

Dual SIM Card Settings (P051)

LED Indicators and Status

Interpreting LED Status

Guide to understanding the meaning of different LED colors and states for various functions.

General Installation and Safety

Safety Precautions

Important safety warnings regarding liquids, fire, modification, and hazardous areas.