AVIRE Janus Call Director EMS5 User Manual

984-0013-03 i
EMS5 Call Director
Easy Set-Up Instructions
• Note this unit has already been programmed at the factory.
All you need to do is program a phone number to dial.
• Call the EMS5 unit or use your Master Station phone.
• Enter **08601 you will hear three beeps.
• Enter *03 (number to dial) # you will hear three beeps.
• Enter # # to exit programming.
For other programming options refer to manual.
Avire Inc
415 Oser Avenue, Suite Q, Hauppauge, New York 11788
Phone: 631 864 3699 Toll Free: 800 527 9156
Fax: 631 864 2631 Email: sales.us@avire-global.com
www.
avire
-
global
.com www.januselevator.com
Janus is a brand of Avire

AVIRE Janus Call Director EMS5 Specifications

General

Category	Telephone Accessories
Product Type	Call Director
Brand	AVIRE
Model	EMS5
Compatibility	Emergency telephones
Power Supply	24V DC
Mounting	Wall Mount
Features	emergency communication
Type	Emergency Call System

Summary

Wiring Diagram

Wiring and Layout Considerations

Wiring to Elevator Phones

Details wiring requirements for elevator phones.

Wiring to Master Stations with Display

Details wiring for master stations with displays.

Wiring to Machine Room Phones

Details wiring for machine room phones without display.

Installation Instructions

Mounting Unit and Keyholes

Instructions for mounting the unit using keyholes.

Switching Primary/Secondary Roles

Steps to switch primary/secondary roles and assign order numbers.

Multiple EMS5 Unit Mounting

Guidance on mounting multiple EMS5 units in sequence.

Programming Instructions

Accessing Programming Mode

Details three methods to enter the programming mode.

Programming Dialing on Standard Phone Line

Instructions for programming phone numbers for dialing.

Programming Voice Messages

Record and Playback Messages

Commands for recording and playing back voice messages.

Program Ring-Down Line Dialing

Instructions for programming a Ring-down line configuration.

Additional Programming Commands

Configure Ring and Outgoing Rings (*1 ABC#)

Command to configure incoming rings, local port rings, and outgoing rings.

Set Low Battery Backup Call Number (*05)

Sets the number for low battery backup calls.

Configure Call Timer (*43)

Configures the call timer duration.

Advanced Programming Commands

Optional Commands (*5 DEF#)

Optional commands for Ring Down mode, external call forcing, and call out signaling.

Enable Automatic Rollover (*75 1 #)

Enables automatic rollover to the next phone.

Configure Hang-up Tones (*87X#)

Configures hang-up tones.

EMS5 Onboard Display Codes

X0: Communication Error

Error code indicating communication issues.

LB: Low or Bad Battery

Indicates low or bad battery status.

XX: Active Elevator Call

Shows active calls from elevators.

Programming Handsfree Phones

Initiate Programming and Call Elevator

Initiate programming by calling specific elevator.

Enter Passcode and Configure Numbers

Enter passcode and disable programmed numbers.

Set Location Message

Program and record a location message.

Operating Instructions

Master Station Operation Procedures

Procedures for operating the master station.

Answering Service Call Handling

Procedures for the answering service receiving elevator calls.

Calling Elevator from Master Station

Process for calling an elevator from the master station.

Operating FAQ's

Multiple Outgoing Calls Behavior

Behavior with multiple outgoing calls.

System Call Out on Busy Line

System behavior when phone line is busy.

Emergency Calls During Other Conversations

Handling of emergency calls during other conversations.

Troubleshooting Guide

Hands-Free Phone Fails to Place Call

Steps for when a hands-free phone fails to place a call.

Check Button and Phone Connections

Verifying button and phone connections.

Test with Handset Phone

Testing with a handset phone.

Mounting Diagram

Specifications

Mechanical Specifications

Physical dimensions and weight of the unit.

Electrical Specifications

Electrical requirements, power, battery, and line voltages.

Warranty Policy

Return Policy

FCC Compliance