Need help?Do you have a question about the Avital 4200 and is the answer not in the manual?
General| Brand | Avital |
|---|---|
| Model | 4200 |
| Category | Remote Starter |
| Language | English |
Details on warranty voidance, required information for validation, and dealer verification.
Controls the Arm/Panic ON/Panic OFF function of the system.
Controls the Disarm function of the system.
Controls Silent Mode and an Auxiliary Output.
Controls the Remote Start function.
Controls Timer mode for the system.
Controls Turbo/Short Run functionality.
Controls the Channel 4 output.
Controls the Rear Defroster function.
Lists the main control module as an included component.
Lists the HX receiver/antenna as an included component.
Lists two four-button transmitters as included components.
Lists the red status LED indicator light as included.
Lists the push-button Valet button as included.
Lists warranty registration as an included item.
Lists a shut-down toggle switch as an included component.
Details on the system's maintenance requirements and remote battery life.
Information on warranty registration, proof of purchase, and dealer verification.
Compliance statement with FCC rules regarding device operation and modifications.
Warning regarding the product's intended use with specific vehicle types and transmissions.
Details the default button assignments for transmitter functions.
Controls the Arm/Panic ON/Panic OFF function of the transmitter.
Controls the Disarm function of the transmitter.
Controls Silent Mode and an optional auxiliary function.
Controls the Remote Start function by pressing the button twice.
Activates optional auxiliary functions by pressing buttons simultaneously.
Controls the rear window defogger during remote starting.
Crucial safety warnings and precautions for system operation and installation.
Instructions for arming the system, including door locks and horn confirmation.
Instructions for disarming the system, including door unlocks and horn confirmation.
Manual override procedure for disabling the starter kill when the transmitter is lost or damaged.
Enables Valet Mode to disable starter kill while retaining convenience functions.
Procedure to activate Panic Mode for attracting attention using horn and parking lights.
Allows remote vehicle start for a programmable period, with climate control adjustment.
Instructions for controlling the rear defogger output ON/OFF during remote start.
Allows the vehicle to remain running after ignition removal for short periods.
Mode to keep the engine running for a programmable period to cool down the turbo.
System starts the vehicle and runs for a set duration, can be programmed for intervals.
Prevents starter engagement during remote start to avoid damage.
Temporarily disables the remote start unit using a shutdown toggle switch.
Configures the vehicle's run time for remote start (12, 24, or 60 minutes).
Sets the run time for timer mode (3, 6, 9, or 12 minutes).
Closes vehicle windows automatically after remote locking.
Configures parking lights to flash or stay constant during remote start.
Sets passive mode for automatic Failsafe® Starter Kill activation.
Controls automatic door locking/unlocking based on ignition status.
Configures door locking behavior with Passive Mode.
Enables or disables horn honk confirmations for system arming/disarming.
Defines the system's main control unit, housing the microprocessor.
Defines the automatic switch preventing starter cranking when armed.
Defines the LED as a red light indicating system status.
Defines the transmitter as a hand-held remote control.
Defines the Valet button for overriding starter kill or entering Valet Mode.
Illuminates the domelight for 30 seconds when the system is disarmed.
Controls vehicle power door locks, with programmable automatic locking.
Operates the vehicle's trunk or hatch release via an auxiliary output.
Controls vehicle power windows, allowing them to roll up or down.
Unlocks the driver's door first, then passenger doors, for added security.
Uses auxiliary outputs for preset seat positioning on system commands.
Steps to arm the system using the remote transmitter.
Steps to disarm the system using the remote transmitter.
Manual procedure to disable the starter kill without a transmitter.
Steps to remotely start the vehicle using the transmitter.
Procedure to enter or exit Valet Mode using the ignition and Valet button.
Steps to activate Panic Mode using the transmitter.
Steps to activate Timer Mode using the transmitter.
Steps to activate Turbo Mode by parking and using the transmitter.
Procedure to disable the remote start system using the shutdown toggle switch.
Procedure for Valet Take-Over to keep the vehicle running after ignition removal.
How to turn the rear window defogger on or off during remote starting.
To Next Page
