Need help?Do you have a question about the AVL Looms A Series and is the answer not in the manual?
Details essential safety precautions and warnings to ensure safe operation.
Provides an overview of the A-Series loom, its features, and contact information.
Outlines the fundamental steps for assembling the loom.
Explains loom orientation and lists necessary tools for assembly.
Guides on unpacking components and identifying all hardware pieces.
Step-by-step instructions for assembling the loom's side frames.
Details on connecting the side frames with cross members for structural integrity.
Crucial steps to ensure the loom frame is square and level for optimal performance.
Covers the installation of treadles or the E-Lift motor system.
Details installing the dobby head and connecting harness cables.
Guides on installing heddles and harness spring systems.
Instructions for installing lower and upper warp beams.
Guides on installing tension arms and the cloth beam assembly.
Details the setup and function of the cloth storage system.
Guides on installing the temple system to prevent warp draw-in.
Details on installing the standard bottom swing beater.
Instructions for optional single-box and multi-box flyshuttle tie-ups.
Instructions for installing the optional overhead beater assembly.
Covers installation of raddle, tension box, auto advance, and locking brake.
Information on air components, compressor requirements, and system setup.
Contains warranty information, customer service contacts, and user notices.
To Next Page
General