FRITZ!Box Fon WLAN 7270 114
LEDs
13.4 LEDs
Five LEDs are built into the top of the FRITZ!Box Fon WLAN
7270, which flash or light up to display various connection
statuses.
LED Status Meaning
Power/DSL on FRITZ!Box on standby
the device has electrical power and the DSL line is ready
for operation
flashes
the device has electrical power
the connection to DSL is being established or has been
interrupted
Internet on a telephone connection to the Internet is active
flashes there are messages in your mailbox (this function must be
supported by your telephony carrier)
Fixed Line on a telephone connection via the telephone line (ISDN/ana-
log) is active
flashes there are messages in your mailbox (this function must be
supported by your telephony carrier)
WLAN on the WLAN function is enabled
flashes the WLAN function is being enabled or disabled
INFO on a telephone connection between two Internet telephony
subscribers is active; the call is free of charge (this func-
tion must be supported by your Internet telephony pro-
vider)
signals an event that can be configured freely by the us-
er
the Stick & Surf procedure has been concluded
flashes
firmware is being updated
the value specified for the online meter has been
reached
signals an event that can be configured freely by the us-
er
Stick & Surf procedure in progress
logon procedure for a DECT handset in progress
To Next Page
Loading...
Need help?
General
