AVM FRITZ!DECT 200 - LEDs and Buttons; On;Off Button and LED; DECT Button and LED

LEDs and Buttons
Display/Operation Condition
On/OffOn/Off
Press the button Switch the socket on and o
o Socket is switched o
on Socket is switched on
ashing Firmware update
ashes briey at
regular intervals
Socket is switched o because the power limit was exceeded; see page 14
DEC
T
DEC
T
Hold the button
down for at least
sixseconds
Deregister; see page 11
on Registered with FRITZ!Box
ashing Is being registered with FRITZ!Box, or rmware update
ashes briey at
regular intervals
No connection to the FRITZ!Box
FRITZ!DECT200 is not registered, or is outside the range of the FRITZ!Box.
On/O
DECT
On/O
DECT
On/O
DECT
On/O
DECT
12