AVM FRITZ!DECT 210 - LEDs and Buttons

LEDs and Buttons
Action / Display Condition
On/Off
Press the button Switch the socket on and o
o  Socket is switched o
on Socket is switched on
 ashing Software update in progress
 ashes brie y
Maximum load exceeded (3450W/15A
ohmic load)
DECT
Press and hold the button
down for at least 6seconds
FRITZ!DECT210 is deregistered from your
FRITZ!Box.
on
FRITZ!DECT210 is registered with your
FRITZ!Box.
 ashing Software update or registration in progress
 ashes brie y at regular
intervals
FRITZ!DECT210 is not connected with your
FRITZ!Box (not registered, or outside the
DECT range)
25