AVM FRITZ!Repeater 1200 AX User Manual

Safety Instructions
Overview
Before connecting the FRITZ!Repeater, observe the following security
instructions in order to protect yourself, the surroundings, and the
FRITZ!Repeater from harm.
Easy Accessibility
It must always be possible to disconnect the FRITZ!Repeater from
electrical power.
• Insert the FRITZ!Repeater into an electrical outlet that is easy to
reach.
Overheating
Heat accumulation can lead to overheating of the FRITZ!Repeater and
subsequently damage the FRITZ!Repeater.
• Install the FRITZ!Repeater in a place that is protected from direct
sunlight.
• Provide for sufficient air circulation around the FRITZ!Repeater.
• Make sure that the ventilation slits on the housing are always
unobstructed.
• Do not cover the FRITZ!Repeater.
• Avoid operation in the direct vicinity of a radiator or heating unit.
Moisture, Liquids and Vapors
Moisture, liquids and vapors that find their way into the
FRITZ!Repeater can cause electric shocks or short circuits.
• Only use the FRITZ!Repeater indoors.
• Never let liquids get inside the FRITZ!Repeater.
• Protect the FRITZ!Repeater from vapors and moisture.
General Remarks
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
5FRITZ!Repeater600

AVM FRITZ!Repeater 1200 AX Specifications

General

Wi-Fi Standard	Wi-Fi 6 (802.11ax)
Frequency Bands	2.4 GHz and 5 GHz
LAN Ports	1 x Gigabit Ethernet
Mesh Support	Yes
WPS	Yes
Security	WPA3, WPA2, WPA
Power Supply	230 V, 50 Hz
Weight	160 g
MIMO	2x2 MIMO
Power Consumption	Approx. 6 watts
Wireless Speed	Up to 3, 000 Mbit/s (2, 400 Mbit/s / 5 GHz + 600 Mbit/s / 2.4 GHz)