To Next PageTo Next Page
Need help?Do you have a question about the AVM FRITZ!Repeater 600 and is the answer not in the manual?
General| 5 GHz | - |
|---|---|
| 2.4 GHz | Yes |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Maximum data transfer rate | 600 Mbit/s |
| Product color | White |
| Supported protocols | IPv6 |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power consumption (typical) | 2 W |
| Security algorithms | WPA2 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Type | Network repeater |
| Maximum transfer distance | - m |
| Wi-Fi band | Single-band (2.4 GHz) |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
Weight and Dimensions| Depth | 30 mm |
|---|---|
| Width | 63 mm |
| Weight | 88 g |
Safety guidelines for operating and handling the FRITZ!Repeater 600.
Details the functions of the device's Connect button and status LED lights.
Explains the repeater's purpose, Mesh Wi-Fi capabilities, and user interface access.
Step-by-step guide for connecting the repeater to a router using the WPS button.
Explains the meaning of different LED light patterns during WPS connection.
Guide for connecting the FRITZ!Repeater using the setup wizard if WPS is not supported.
Details on operating the repeater within a FRITZ!Box Mesh or with other routers.
Instructions on using the FRITZ!App WLAN to optimize repeater placement.
Information on data transfer for product improvement and legal/licensing conditions.
Guidelines for proper disposal and declaration of CE conformity.
