To Next Page

To Previous Page

Connect the FRITZ!Repeater 600 to the Wireless Router

using the Wizard

If your wireless router does not support setup at the touch of a button

(WPS), use the wizard to connect the FRITZ!Repeater with the wireless

router.

Establishing a Connection to the Computer

1. PlugtheFRITZ!Repeaterintoanoutletnearyourwirelessrouter.The

FRITZ!Repeaterstartsoperation.

2. WaituntiltheLEDstartsslowlyashinggreen.

3. Select the Wi-Fi network of your FRITZ!Repeater on the computer, and

starttheconnectionprocess.

4. EnterthenetworkkeyoftheFRITZ!Repeater.Theprecongured

uniquenetworkkeyisprintedonthebackofthisguideandonthe

backofthedevicehousing.

ThecomputerestablishesaconnectiontotheFRITZ!Repeater.

Run the Wizard

1. Open the web browser on your computer and enter http://fritz.

repeaterintheaddressbar.

2. Thecongurationwizardappearsandguidesyouthroughsetupofthe

Wi-FiconnectionbetweentheFRITZ!Repeaterandyourwirelessrouter.

3. Insert the FRITZ!Repeater into an outlet located about halfway between

the wireless router and the wireless devices to be added to the Wi-Fi

network.TheFRITZ!Repeaterandyourwirelessrouterconnectonce

more.

LED lights up green: the FRITZ!Repeater has a good Wi-Fi connection

andisreadyforoperation.

LED lights up orange: the FRITZ!Repeater has a weak Wi-Fi

connection.InsertthetheFRITZ!Repeaterintoanoutletclosertothe

wirelessrouter.

LED ashing continuously orange: cannot connect via Wi-Fi.Insertthe

theFRITZ!Repeaterintoanoutletclosertothewirelessrouter.

1110

Questions and Answers:

Need help?

Do you have a question about the AVM FRITZ!Repeater 600 and is the answer not in the manual?

AVM FRITZ!Repeater 600 Specifications

General

5 GHz	-
2.4 GHz	Yes
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	600 Mbit/s
Product color	White
Supported protocols	IPv6
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (typical)	2 W
Security algorithms	WPA2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Type	Network repeater
Maximum transfer distance	- m
Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)