Chapter 3: Local Port Operation 31
Table 3.6: Commands to Manage Routine Tasks for Your Target Devices
Feature Purpose
Broadcast
Enable
Begin broadcasting to your target devices. Configure a target device list for broadcasting under
the Setup dialog box.
Scan Enable Begin scanning target devices. Set up a target device list for scanning in the Setup dialog box.
User Status View and disconnect users.
Display
Versions
View version information for the AutoView 3100/3200 switch as well as view and upgrade
firmware for individual AVRIQ modules.
Reset PS/2 Re-establish operation of PS/2 keyboard and mouse.
To Next Page
Loading...
