C50 APR New Equipment Training Module – March 2010 Rev01
Avon’s products fall within the definition of significant military equipment in the United States Munitions list, International Traffic in Arms Regulations and may
only be supplied outside of the United States of America to customers who are licensed by the US Department of State, Directorate of Defence Trade Controls.
22 CFR 125.4(b)(5) applicable.
Installation
1. Reach inside facepiece and hold nosecup away from
vision correction assembly
2. Place the vision correction support frame on the stand-
off and push it down
3. Flex the facepiece in the temple strap area on the left
or right sides of the mask; gently push the support
frame-mounting tabs into the vision correction
mounting socket.
Vision Correction Assembly
To Next Page
Need help?
General