Phone: 1-803.358.3600 • Fax: 1-803.358.3636
100 Innovation Place • Lexington SC 29072 USA
avtecinc.com • sales@avtecinc.com
Introduction
NENARadio/Telephone Headset Interface
NOTE
This guide is for the Hardware Media Workstation. See Avtec's USBNENAJack Box Configuration Guide for
information on configuring the USBNENA Jack Box for the Software Media Workstation.
The Scout Radio/Telephone Headset Interface provides connectivity and control signaling between the Scout console
and a NENA compliant external E911 phone for Hardware Media Workstation configurations.
Configuring the interface for an E911 Radio/Telephone phone set allows a dispatcher to receive telephone audio from
an E911 Radio/Telephone phone through their Scout console headset, essentially using their headset for both
telephone and radio communications when the telephone system is accessed via an E911 phone.
1
NENA/Deskset for Hardware Media Workstation | November 2020 | Revision 8
To Next Page
Loading...