To Next PageTo Next Page
Need help?Do you have a question about the Avtec VENTILATION SYSTEMS and is the answer not in the manual?
General| Brand | Avtec |
|---|---|
| Category | Ventilation Hood |
| Material | Stainless Steel |
| Construction | Modular |
| Lighting | LED |
| Filters | Baffle Filters |
| Compliance | NFPA 96, UL 710 |
| Airflow Control | Variable Speed |
| Capture Efficiency | High |
| Optional Features | Fire Suppression System |
| Maintenance | Easy Clean |
Describes Baffle Filter [AF Series] ventilators, UL listed, for duct hood protection and grease extraction.
Describes Modular Grease Extractors [AX Series] ventilators, UL listed, for duct hood protection and grease extraction.
Describes Auto Wash Down [AW Series] ventilators, UL listed, for duct hood protection and automatic cleaning.
Details minimum exhaust and maximum make-up airflow requirements for different ventilation models.
Discusses Wet Chemical and Water Mist fire extinguishing systems, their types and requirements.
Details dimensions and connection methods for mounting control panels to walls.
Details field connections, terminals, and wiring for the VCW Control Panel.
Details field connections, terminals, and wiring for the PAWS Control Panel.
Explains the electrical connections for dampers and detectors in AW and optional AX models.
Describes the electrical supply requirements and connections for ventilator lights.
Explains the hot water supply connection for the auto wash feature to clean extraction chambers.
Describes the connection for the optional cold water mist feature used for particulate extraction.
Details the drain pipe connection requirements and the use of an air gap assembly.
Describes the interconnection method for field joints on AW Hoods using elbows and couplers.
Explains the connection of the detergent pump and tank for the auto wash system.
Mentions the need for interconnection of hot water, cold water, or drains between ventilator sections.
Details adjustment, sequence of operation, and troubleshooting for the VCW Control Panel.
Explains manual operation, trouble conditions, and fire protection features of the PAWS Control Panel.
Describes Baffle Filter ventilators, their features, and filter installation procedures.
Describes Modular Grease Extractors, their features, and module installation procedures.
Describes Auto Wash ventilators, their features, and access to the extraction chamber.
Explains the function and adjustment of air baffles for controlling airflow.
Details fusible link and electro-mechanical fire dampers, their operation, and maintenance.
Describes different types of air make-up plenums available for ventilation systems.
Explains the auto wash feature for automatic cleaning of the grease extraction area.
Describes the optional cold water mist feature for aiding in particulate extraction and cooling.
Provides instructions for replacing incandescent and fluorescent light bulbs.
Details the recommended cleaning frequency and methods for baffle filters.
Details the recommended cleaning frequency and methods for modular grease extractors.
Details the procedure for checking and cleaning the grease trough.
Details the procedure for emptying and cleaning the grease collection receptacle.
Details cleaning recommendations for the inside of the hood canopy and extraction chamber.
Details checks and cleaning procedures for the detergent tank and system.
Details the procedure and frequency for replacing fusible links in fire dampers.
Lists electrical components and part numbers for the PAWS control panel.
Lists electrical components and part numbers for the VCW control panel.
Lists plumbing components and part numbers for PAWS/VCW panels.
Lists available part numbers and sizes for EVAC Cleaner/Degreaser.
Lists specific parts and part numbers for electro-mechanical dampers.
Lists part numbers for various fusible link dampers and related components.
Lists part numbers for hood canopy components, including filters and lights.
Provides instructions for taking exhaust air movement readings for Energy Aire hoods.
Provides instructions for taking exhaust air movement readings for filter hoods.
Provides instructions for taking air movement readings for supply plenums.
