9
3.2 Network Configurations via Wizard
A quick installation wizard is available via your web browser for password change, date & time
settings, and network configurations.
Note: You can also change the settings in the system configuration page via your web
browser later. For details, please refer to “5. ACCESSING THE CAMERA VIA WEB
BROWSER” in the user manual.
Step1: Open your web browser, for example, Microsoft Internet Explorer, and enter
“http://192.168.1.10
” in the URL address box.
Step2: In the login page, key in the default user name (admin) and password (admin), and enter
the security code from the image below. Then, click “LOGIN”.
Step3: The wizard is then starting analyzing your network environment, and shows your network
environment. Select “Next” to continue.
Step4: In “Account”, change the access password if needed.
If not, leave all the columns blank, and select “Next”.
Step5: In “Date and Time”, check if the date and time setting are correct and modify if
necessary.
To Next Page
Loading...
