to turn the scale off and accept the calibration. Calibration is complete!
V. Troubleshooting
The primary reason for innaccuracy or malfunction are low
batteries, improper calibration, overload or operating on an
unstable surface. Please keep this in mind and maintain
and operate your scale properly. This scale is a precision
instrument and must be handled with care.
Error Code Descriptions:
Error: Nothing on screen, [LO],
Solution: Replace Batteries
Error: [EEEE]
Solution: Load is in excess of 20g, remove the extra load.
VI. Specications
Capacity: 20g; 100ct; 308.8gn; 12.86dwt
Graduation: 0.001g; 0.005ct; 0.02gn; 0.001dwt;
Units: grams (g) / carats (ct) /
grains (gn) pennyweight (dwt)
Calibration: Auto Calibration; User Calibration with (2)10g
weights
Tare Range: Tare full capacity
Auto Off: 60 seconds
Display: 5 digits 1/2” in height
To Previous Page
Loading...
