PS-25
mode. Calibration is complete!
X. Troubleshooting
• Problem: Scale will not turn on
• Solution: Check the batteries or AC adapter
• Problem: Displayedweightuctuatesrandomly
• Solution: Make sure your workspace is stable and
freeofanyaircurrents,vibration,ormagneticelds
• Problem: Displayed weight is inaccurate
• Solution: Perform a calibration adjustment
XI. Error Codes
1. OUTZ - Zero range has shifted. Perform calibration adjustment.
If the problem persists, the load cell may be permanently
damaged due to overloading.
2. O-LD - Maximum capacity exceeded. Remove the extra weight
to avoid damaging the load cell.
3. L - Batteries are low. Replace the batteries.
PS-25
Max. Capacity 25kg / 55lb / 55lb:0.0oz
Readability 2g / 0.02lb / 0.2oz
Min. Capacity 6g / 0.2oz
Power 2 x AA Batteries or AC Adapter
Platform Dimensions 8.0 x 8.0 x 2.8 in.
Warranty 10 Year Limited Warranty