What to do if AWS PK-110 display EEEE overload?
If your AWS Scales display 'EEEE' indicating an overload, remove the extra weight from the scales. This will help you avoid permanently damaging the load cell.
What to do if displayed weight fluctuates randomly on AWS PK-110 Scales?
If the displayed weight on your AWS Scales fluctuates randomly, it might be due to nearby devices emitting radio waves. To resolve this, ensure you hold the device as still as possible or hang it from a fixed point.
How to fix inaccurate weight display on AWS PK-110 Scales?
If your AWS Scales are displaying an inaccurate weight, perform a calibration adjustment.
How to fix AWS PK-110 Scales that will not turn on?
If your AWS Scales will not turn on, check the batteries and battery contacts.
What to do if AWS Scales show OUTZ error?
If your AWS Scales are showing an 'OUTZ' error, indicating that the zero point has drifted out of the acceptable range, try to perform a calibration adjustment. The load cell may be permanently damaged due to overloading.
Turns the scale on or off.
Re-zeros the scale or removes container weight.
Changes displayed unit of measure or enters calibration.
To Next Page
General
