Auto Hold: Weight reading is held on the
display after stabilization. This allows you to
read the weight even after removing the item
from the weighing hook. “Hold” will display
underneath the weight when locked.
Peak Hold: Highest weight reading is held
on the display. This mode can be used to
measure a bow’s draw weight or for other
force measuring applications. “Hold ” will
display underneath the weight when locked.
Hold Disabled: Weight is no longer held on
the display.
3. Press the ON/OFF ( ) keytoconrmyourselection
and turn the scale off.
VI. Changing the Unit of Measure
1. Press the Unit key to change the scales displayed
unit of measure.
2. If the scale is turned off then back on, it will default
to the last unit used.
• PK-110 Units: lb (pound) oz (ounce) kg
(kilogram)
VII. Using the Tare Feature
You can use this scale’s tare feature to subtract the weight
of an empty container for net weight determination. NOTE:
The weight of the container will subtract from the available
capacity (subtractive taring).
To Next Page
Loading...
